One-line positioning
For the full R&D lifecycle of regenerative and transparent spaceborne base stations, simulated terminals and a simulated core network create a surrounding test environment to fully validate communication functions, protocol conformance, performance and stability before a communication satellite is launched.
Solution overview
Spaceborne base stations are the access nodes of the space segment of satellite internet. Compared with terrestrial base stations, they face long propagation delays, large Doppler shifts caused by high satellite speeds, low signal-to-noise ratios, and limited onboard computing and power resources. These characteristics create substantive differences in protocol stack implementation, resource scheduling and fault handling, so terrestrial base station test methods and conclusions cannot simply be reused.
This solution uses XproUESimulator to simulate S-band / Ka-band satellite terminals, XproReplay to simulate 4G / 5G / NTN / 6G core networks, XproIMS to simulate the voice core network and UE IMS voice services, and XproNS to simulate real UE media-plane service traffic, creating a test environment surrounding the spaceborne base station under test. Simulated terminals provide its uplink side and a simulated core network its downlink side. Both ends are provided by instruments, enabling end-to-end testing without real satellites, real gateway stations or a real core network.
The solution covers three stages of spaceborne base station development: early R&D testing (unit functions, protocol stack features and interface testing), mid-stage integration testing (end-to-end procedures, VoNR / ViNR services and concurrent multiple beams), and late-stage end-to-end and capacity testing (large-scale access, long-duration stability, version regression and dynamic ephemeris testing).
Core capabilities
① Surrounding test environment for spaceborne base stations
- Terminal-side simulation: XproUESimulator simulates large-scale satellite terminal access, covering the complete PHY / MAC / RLC / PDCP / RRC / NAS / SDAP terminal-side protocol stack. It supports NR (FDD / TDD) Release 18, NTN (FDD) 3GPP Release 18, and versions 1.6 / 2.1 of the specifications of a well-known Chinese satellite operator
- Core network-side simulation: XproReplay simulates 4G / 5G / NTN / 6G core network elements and their interfaces (EPC / 5GC / NTN / 6G), building a complete core network without real network elements
- Voice-side simulation: XproIMS completes IMS registration and VoNR / ViNR call service loops to validate voice service delivery quality over satellite links
- Service-side simulation: XproNS generates real service traffic (TCP/IP, application protocols, audio/video, industrial control protocols, etc.). Traffic sent by the instrument traverses the simulated terminal, the base station under test and N3 / N6, returning to XproNS for statistics to produce a complete data statistics report
- Both payload modes supported: testing supports both regenerative and transparent spaceborne base stations. Regenerative base stations connect directly to the simulated core network for end-to-end testing; transparent base stations are tested across simulated terminals and a terrestrial simulated core network, with the onboard segment focusing on RF, baseband processing and forwarding performance. Test items and evaluation criteria are defined separately for the two modes
② Typical performance test scenarios for spaceborne base stations
- Long-delay scenario performance: simulate long satellite-to-ground RTTs (approximately 20~50ms for LEO and 500~700ms for GEO), test transmission performance of typical TCP / UDP services, and validate transport-layer protocol adaptation to long-delay scenarios
- Doppler shift scenarios: simulate Doppler frequency offsets caused by fast-moving LEO satellites, test frequency-offset compensation by physical-layer synchronization and reception algorithms, and observe demodulation performance changes at different offset amplitudes
- Beam handover performance: test handover success rates, handover latency and service packet loss during handover in different scenarios, validating whether handover performance meets real-time voice and video service requirements
- Concurrent multi-user performance: simulate simultaneous user access and concurrent services to test system access capacity, average per-user throughput and end-to-end latency, validating resource scheduling fairness and efficiency
- Continuous-operation stability: conduct continuous full-load tests for more than 72 hours, collecting packet loss rates, disconnection counts and fault recovery times
- Dynamic ephemeris testing: dynamically update link delay, Doppler shift and beam pointing parameters along the timeline using ephemeris data, supporting second-level impairment policy updates to validate synchronization tracking and parameter adaptation during actual satellite orbital motion
③ Protocol conformance and robustness testing
- Protocol conformance testing based on 3GPP and the specifications of a well-known Chinese satellite operator, covering new protocol points in spaceborne base station air-interface protocols
- The programmable protocol stack (XproFlexStack) supports on-site editing of terminal-side NAS and RRC encoding/decoding formats and signaling procedures for spaceborne base station protocol stack robustness and private air-interface protocol validation
- Air-interface security testing: RRC signaling integrity protection and encryption, replay protection, AS algorithm selection and gNB key refresh; user-plane data confidentiality and integrity protection and handling of integrity check failures (see solution 5)
Key technical specifications
| Item | Parameters / description |
|---|---|
| Terminal simulation capacity | Up to 16,000 RRC-connected users (beam-bound mode, 8 beams × 2,000 users); 4,000 active users (whole system) |
| UE access rate | 200 users/second |
| Communication technologies | NR (FDD/TDD) Release 18; NTN (FDD) 3GPP Release 18; versions 1.6 / 2.1 of the specifications of a well-known Chinese satellite operator |
| RF bandwidth | 400MHz uplink and downlink (optional configuration: RF front-end replacement and twice the number of GPUs required) |
| Operating bands | S band / Ka band (FR1; FR2 requires an external frequency converter) |
| Beams per system | 8×S band / 8×KA band 100MHz / 4×KA band 200MHz |
| Core network technologies | 4G / 5G / NTN / 6G core networks (EPC / 5GC / NTN / 6G) |
Target customers
- Spaceborne base station payload developers
- Communication satellite manufacturers (whole-satellite communication system integration testing)
- Satellite operator technical departments (spaceborne base station selection and acceptance testing)
- Research institutes and universities (NTN access network research)
Verifiable facts
- Multi-terminal simulator products for spaceborne base stations have been delivered, with simulation capabilities in both the S and Ka bands
- In use at multiple domestic satellite operators and communication satellite manufacturers
- Both OTA air-interface coupling and direct RF cable connections are available; indoor and outdoor SDR equipment have both been used in projects
- Supports cascading 4 terminal simulators for expansion (S band / Ka band 100MHz beams, up to 32 beams)
