Satellite core network R&D testing

For satellite core network R&D and validation, full-stack simulation validates NTN core network functions, end-to-end service connectivity, onboard UPF coordination, and robustness under high latency and intermittent connectivity without real satellites or real gateway stations.

One-line positioning

For satellite core network R&D and validation, full-stack simulation validates NTN core network functions, end-to-end service connectivity, onboard UPF coordination, and robustness under high latency and intermittent connectivity without real satellites or real gateway stations.

Solution overview

A satellite core network is not a simple port of a terrestrial core network. NTN enhancements create systematic differences in ten dimensions: access type identification, UE location information requirements, tracking area mechanisms, user-plane deployment architecture, end-to-end latency characteristics, connection continuity, QoS and policy mapping, mobility management granularity, security and authentication mechanisms, and network management and operations (see the comparison table below). These differences require separately designed test points, abnormal-condition generation methods and evaluation criteria.

This solution uses XproReplay to simulate 4G / 5G / NTN / 6G core network elements and interfaces, XproUESimulator to simulate NTN-capable terminal and spaceborne base station-side behavior, and XproIMS to simulate the voice core network. A programmable protocol stack generates abnormal signaling to complete the satellite core network test environment.

Testing has three levels: individual network element testing (independent validation of core functions such as AMF NTN registration and SMF session management), end-to-end system testing (the complete process from UE registration and PDU session establishment to service flow connectivity), and onboard UPF coordination testing (simulation of architectures such as “terrestrial control plane + onboard user plane” to validate space–ground coordination).

Core capabilities

① 4G / 5G / NTN / 6G core network element and interface simulation

  • The signaling plane simulates 4G / 5G / NTN / 6G core network elements and their interfaces, including AMF, SMF, AUSF, UDM, UPF, NSSF, NRF, PCF, CHF, AF and SCP
  • Supports 4G EPC network element simulation (eNB, MME, SGW, PGW, HSS and PCRF) and complete 4G / 5G interoperation
  • Supports new 5G R16 service features: 5G LAN / N19 simulation, Ethernet sessions, SCP network element simulation and NPN secondary authentication
  • The media plane generates large-scale media traffic following specified service models, triggered by signaling events and synchronized with UE access and disconnection

② Targeted validation of ten technical differences in satellite core networks

Difference Terrestrial 5G core network Satellite core network (NTN enhancements)
Access type identification No special identification; all gNBs are considered terrestrial base stations NGAP signaling must carry extension IEs such as NTN-Indication and Satellite-Type (LEO / MEO / GEO)
UE location information requirements Cell ID or TAC only UE / gNB reports WGS-84 latitude and longitude after registration for beam-position matching, paging and UPF selection
Tracking Area mechanism TAC is statically configured and bound to a fixed geographical area No TAC concept; the core network uses only beam positions
User-plane deployment architecture All UPFs are deployed in terrestrial data centers Supports onboard UPF for local breakout and edge computing to reduce backhaul load
End-to-end latency characteristics Low latency (<10ms), with short timeout thresholds Supports high latency (LEO: 20~50ms; GEO: 500~700ms); protocol timers and retransmission mechanisms require substantial adjustment
Connection continuity Continuous coverage; link interruptions are treated as faults Supports Intermittent Connectivity, requiring session retention and recovery mechanisms
QoS and policy mapping Based on standard 5QI mapping Introduces NTN-specific QoS parameters (such as delay tolerance indication and NTN reliability), supporting delay-tolerant services
Mobility management granularity Cell-based handover (Xn handover) Supports beam-position-based handover and selection of terrestrial or onboard UPF based on beam position
Security and authentication mechanisms Standard 5G AKA / EAP-TLS procedures Must account for authentication synchronization and enhanced replay protection under long delays; some scenarios support pre-authentication or lightweight authentication
Network management and operations Fixed base station positions and static topology; convenient alarms / configuration / upgrades Dynamic topology and limited backhaul windows; operations depend on onboard autonomous analysis, diagnosis and adaptive configuration adjustment

③ Typical satellite core network test scenarios

  • NTN core network functional validation: validate whether AMF / SMF / UPF support key 3GPP Rel-17 NTN functions, such as NTN identifier recognition, dynamic TAI handling, UE location report parsing and ephemeris matching
  • End-to-end service connectivity testing: simulate the complete UE process from initial registration, authentication and PDU session establishment to service data transfer, validating end-to-end connectivity of “terrestrial control plane + onboard / terrestrial user plane”
  • Onboard UPF coordination testing: simulate N4 interface interactions between SMF and satellite-deployed UPF, validating session establishment, policy delivery, charging reports and user-plane local breakout
  • High-latency and intermittent-connectivity robustness testing: inject satellite link characteristics such as delays of hundreds of milliseconds, link interruption / recovery and signal scintillation to validate core network session retention, retransmission and recovery under extreme conditions
  • Multi-vendor interoperability testing: provide a standard “golden reference” connecting AMF / SMF / UPF from different vendors to validate NTN signaling compatibility and support mixed-vendor networking
  • Dynamic mobility scenario simulation: simulate terminal beam-position-based handover under high-speed LEO satellite motion to validate core network mobility management stability
  • NTN QoS and policy mapping validation: test policy execution for different services (IoT telemetry, video backhaul and emergency communications) under NTN QoS parameters
  • Abnormal and boundary-condition testing: generate abnormal signaling including invalid NTN identifiers, invalid coordinates, missing ephemeris and excessively long TAU cycles to validate core network fault tolerance
  • Rapid test-network / prototype-system validation: validate core network software versions in advance using full-stack simulation before satellite launch or gateway station readiness
  • Commercial network entry certification and compliance testing: execute standardized NTN test suites against 3GPP, CCSA and ETSI standards and generate compliance reports

Key technical specifications

Item Parameters / description
UE access rate More than 60,000 UE/second per server
Concurrent online users 10 million
Media-plane bandwidth 200Gbps per server
Single-UE access throughput Up to 20Gbps
Maximum simulated gNB nodes 65,535
Maximum DNNs 20,000
Maximum PCC policies 10,000
NIC support General-purpose 10G / 25G / 40G / 100G NICs, based on DPDK
Latency measurement Supports FPGA high-precision latency test offload cards
Deployment forms Cloud, virtualized and distributed deployment

Target customers

  • Core network equipment manufacturers (satellite core network product R&D and validation)
  • Satellite operators (core network selection, integration and network entry testing)
  • Satellite payload manufacturers (validation of onboard network elements such as onboard UPF)
  • Testing and certification bodies and industry alliances (multi-vendor interoperability testing and standardized test suite execution)
  • Research institutes and universities (NTN core network protocol research)

Verifiable facts

  • A complete comparison methodology and test point list for ten technical differences between 5G and NTN core networks have been established
  • Supports simulation of a “terrestrial control plane + onboard user plane” architecture and onboard UPF coordination testing
  • Test methods and evaluation criteria for ten categories of satellite core network test scenarios are available