One-line positioning
Mirror a 5G network structurally equivalent to the live network in a laboratory, focusing on operator operations drills and large-scale disaster scenario evaluation for government regulators. Bring capacity limits, tidal traffic, network element failures and widespread outages—conditions difficult to validate directly in live networks—into a repeatable digital twin environment.
Solution overview
The value of a communication network digital twin is to simulate complex live-network environments and provide test conditions unavailable in production. Deliberately misconfigure a core network element, take an entire DC out of service, simultaneously disable a group of base stations, or inject WAN link degradation: impossible on the live network, but repeatedly evaluable in a twin environment.
The solution has three layers:
- Physical network layer: real live-network 5GC / access network / terminals report network management, active testing and user experience data to the twin layer
- Digital twin platform layer: twin management (model / topology / configuration management), twin network mapping (physical link mapping, EPC / 5GC / IMS protocol stack simulation, traffic model simulation and link impairment simulation), and twin data management
- Digital twin application layer: operator operations drill and regulatory evaluation scenarios, with digital twin large-screen visualization
Twin targets cover 5GC, 5G access networks, 5G terminals and 5G MEC. Complexity lies in topology rather than capacity at a single point: integrated provisioning supports multi-DC / multi-pool topologies with more than 10,000 base stations and over 20,000 signaling and media links combined (specification values), while keeping hardware and impairment emulator costs manageable for large-scale link impairment simulation.
Core capabilities
① Network twin modeling and mapping
- Topology and protocol stack simulation: all-element EPC / 5GC / IMS topology simulation with multi-DC/multi-pool networking; complete signaling- and user-plane protocol stacks from terminals and base stations through core elements (NAS / NGAP / GTPU / RRC / PDCP, etc.)
- Traffic model simulation: construct signaling- and media-plane traffic models from live-network management statistics; live media-plane bandwidth may reach 1000Gbps, while the twin proportionally scales bandwidth to control costs
- Link impairment simulation: map live WAN link degradation metrics into the twin through network impairment emulators, independently simulating each link’s delay, jitter, loss and bandwidth degradation; simulate communication impacts of base station handover and combine wireless with fixed-network simulation
- Slice model construction: create, modify and delete slices; validate multi-slice security isolation and mappings to service management platforms; connect simulated or real core networks / base stations
② Twin data and live-network mapping
- Live-network data integration: connect base station / core network management data, live active-testing system data and user experience data (loss, latency, bandwidth and dropped-call rates), aggregate/process them as twin modeling inputs
- Traffic model conversion: convert network management signaling/media statistics into signaling procedure and media traffic model configurations for simulated terminals / base stations / core networks / IMS
- Live-traffic steering: use AF-issued instructions to steer selected real-user traffic to simulated UPF in the twin layer for validation, with very little interference to live operation and the ability to stop steering at any time
③ Scenario one: operator operations drills
- Core network configuration drills: validate configuration and policy changes for AMF / SMF / UPF / PCF / NRF and other elements in the twin before applying them to production
- Disaster recovery switchover validation: single-element failover (AMF / SMF / UPF / MME / HSS, etc.) and service switchover following complete DC failure, covering EPC / 5GC / IMS; typical scenarios include same-pool AMF failover, cross-pool re-registration and PDU re-establishment, full terminal 4G attach after all AMFs fail, and session re-establishment driven by release cause values
- Base station configuration drills and operations optimization: first validate base station configuration changes and optimization plans in the twin
- Terminal service capability testing: validate terminal service performance and user experience in the twin
④ Scenario two: signaling storm simulation and suppression drills
- Storm cause simulation: cover link failure, network element failure, application triggers and human configuration errors
- Programmable terminal state transitions: define terminal behavior during storms, including heartbeat timeouts/retries, conditions and timing for 5G fallback to 4G, silence timers, retry thresholds, and connected/idle user proportions
- Storm trigger models: support call traffic surge and network element failure triggers; simulate to level-one / level-two / level-three alarms according to alarm models, then restore traffic, with long-duration multi-round drills
- Policy validation: test whether live signaling flow-control policies and storm alarms take effect (requires live UDM data)
⑤ Scenario three: large-scale disaster evaluation for government regulators
- Disaster scenario construction: combine widespread base station outages, regional transmission interruptions and core network DC failures in the twin, with overlapping scenarios
- Network behavior evaluation: evaluate terminal retry waves, signaling storms, 4G fallback and service restoration, producing user experience impacts and network recovery timelines
- Emergency plan validation: validate disaster recovery configurations, flow-control policies, emergency resource scheduling and other recovery strategies under disaster conditions, supporting regulatory drills and emergency plan assessment
Key technical specifications
| Item | Parameters / description |
|---|---|
| Twin targets | 5GC, 5G access networks, 5G terminals and 5G MEC |
| Twin scale | More than 10,000 base stations and over 20,000 signaling/media links combined; multi-DC/multi-pool networking and integrated provisioning of large-scale network element topologies (specification values) |
| Core network protocols | Simulated EPC (MME / SGW / PGW / HSS / PCRF), 5GC (AMF / SMF / UPF / NRF / AUSF / UDM / PCF / CHF / NSSF, etc.), IMS (UE / P-CSCF / S-CSCF / I-CSCF / HSS / AS) |
| Service procedures | Common 4G / 5G / NTN core network procedures (registration, PDU, paging and handover); common IMS procedures (registration, voice calls, video calls and SMS) |
| Deployment forms | Software deployment on X86 or domestic IT ecosystem ARM servers; virtualization / Docker and distributed deployment |
Target customers
- Terrestrial telecom operators (provincial companies and research institutes: planning, configuration drills, disaster recovery drills and signaling storm suppression)
- Telecom regulators, emergency management authorities and supporting organizations (network behavior evaluation under large-scale disasters and emergency plan validation)
Verifiable facts
- The Xpro5GTwins digital twin platform has been delivered as a product, with twin modeling, live-network data integration and large-screen visualization
- Practical 4G / 5G core network switchover emergency drill cases are available, including terminal behavior simulation and result reviews for single/dual AMF, SMF and UPF failures
- A continuous 48-hour live-network model stability simulation has been completed (4G / 5G data and IMS services entering according to live-network patterns)
- Large-scale signaling storm simulation is available to validate live signaling flow-control policies and storm alarms
